Toro 03614, Installation Instructions Manual

Page: 3 / 8

g198626
Figure 5
1. Short carriage screw (8) 3. Flange nut (8)
2. Guard assembly
5. Tighten the flange nuts to secure the brackets to
the roll bar (
Figure 2 ).
6. Check the clearance between the hood of the
machine and the guard assembly. If the hood of
the machine contacts the guard assembly when
you open the hood, move the guard assembly
higher on the roll bar until the hood no longer
contacts the guard assembly.
7. Ensure that all fasteners are tight.
Installing the Guard on a
Reelmaster 3555/3575 Series
Traction Unit
1. Loosely mount the brackets to the roll bar as
shown in
Figure 6 .
g198449
Figure 6
1. Right mounting bracket 4. Mount strap (4)
2. Left mounting bracket 5. Carriage bolt—3/8 x 4-1/2
inch (4)
3. Flange nut (4) 6. Front of the machine
2. Swing the guard wings forward as shown in
Figure 7 .
g198197
Figure 7
1. Guard wing—initial
position 2. Guard wing—final position
3