Toro 03614, Installation Instructions Manual

Page: 1 / 8

Form No. 3411-852 Rev B
Operator Golf Ball Guard
Reelmaster ® 3100/3500/5010 or Groundsmaster ® 3500/4300 Series
Traction Unit
Model No. 03614
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
No parts required
–
Prepare the machine.
Guard assembly 1
Left mounting bracket 1
Right mounting bracket 1
Strap 4
Carriage bolt—3/8 x 4-1/2 inch (Reelmaster
3555/3575 Series traction unit only)
4
Carriage bolt—3/8 x 3-1/2 inch (all except
Reelmaster 3555/3575 Series traction unit)
4
Flange nut 14
Carriage screw (3/8 x 7/8 inch) 8
Shoulder bolt 2
Spacer 2
Install the guard.
Preparing the Machine
Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove the
key from the key switch (
Figure 1 ).
g037695
Figure 1
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3411-852* B