Toro 03248, Installation Instructions Manual

Page: 3 / 8

g245155
Figure 3
1. Rectangular opening
(decal) 3. Rectangular opening
(switch panel)
2. Hole (decal) 4. Hole (switch panel)
2. Align the rectangular openings and hole in the
decal with the rectangular openings and hole in
the switch panel as shown in
Figure 3 .
3. Apply the decal to the switch panel.
Installing the Plugs to the Switch
Panel
1. Align the plug to the rectangular openings in the
switch panel (
Figure 4 ).
g245156
Figure 4
1. Rectangular opening
(switch panel) 2. Plug
2. Insert the plug into the opening until the plug
snaps securely into the panel (
Figure 4 ).
3. Repeat step 1 and 2 for the 3 other plugs ( Figure
4 ).
4
Assembling the Wire
Harness to the Switch
Panel
Parts needed for this procedure:
1 Fuse-block mount
1 Wire harness
2 Socket-head screw (#10 x 3/4 inch)
4 Flange locknut (#10)
2 Carriage bolt (#10 x 1/2 inch)
Assembling the Fuse-Block Mount
to the Wire Harness
1. Align the holes in the fuse-block mount to the
holes in the fuse block of the wire harness as
shown in
Figure 5 .
Note:
Ensure that the mounting rails of the fuse
block are aligned up.
g250867
Figure 5
1. Wire harness 4. Fuse block (mounting rails
up)
2. Socket-head screw (#10 x
3/4 inch) 5. Flange locknut (#10)
3. Fuse-block mount
3