2.
Rock the basket backward to lift the basket pins out of
the basket brackets (Figure 16).
g025830
1
2
Figure 16
1.
Basket bracket
2.
Basket pin
3.
Grasp the center of the basket and slide it outward
(Figure 17).
g025831
Figure 17
Note:
On the Reelmaster 3100 w/sidewinder, move
the cutting units to the left before basket removal.
13
Adding Rear Ballast
(Reelmaster 2000D series only)
No Parts Required
Procedure
This unit complies with ANSl B71.4–1999 Standard and all
applicable European requirements when equipped with rear
ballast. Use the following chart to determine the weight or
combinations of weights needed.
Cutting Unit Configuration
Weight Kits Required
Standard machine with 27 inch
cutting units & baskets
(1) 83-9370
(3) 83-9390
(2) 94-3698
Standard machine with three
wheel drive kit & 27 inch
cutting units
(1) 83-9390
(1) 83–9370
Note:
All configurations require calcium chloride in the rear
tire. Tires should be filled to approximately 75% capacity
(valve level with valve at the top) (60 lb. fluid or 74 lb. tire
and fluid).
Important:
If a puncture occurs in a tire with calcium
chloride, remove the unit from the turf area as quickly
as possible. To prevent possible damage to the turf,
immediately soak the affected area with water.
Either Type 1 (77%) or Type 2 (94%) commercial calcium
chloride flake may be used.
Plain water freezes solid at 0 degrees C (32 degrees F). The
1.6 kg (3-1/2 lb) calcium chloride to 3.8 liter (1 gallon) of
water solution is slush free to -24 degrees C (-12 degrees F
) and will freeze solid at -46 degrees C ( -52 degrees F). The
2.3 kg (5 lb) per gallon (liter) solution is slush free to -50
degrees F (-45 degrees C) and will freeze solid at -62 degrees
F (-52 degrees C).
9
