tornos MultiDeco 20/6, Equipment Logbook Assembly, Operation And Maintenance

Page: 16 / 37

LOGBOOK − M
ULTI
DECO
Chap. 9.5.1 / 16 300428 en − 03/07
9.3 EVERY 1000 HOURS
⇒
Information : Please refer to the machine positions described in the corresponding floorplan.
What to do ? Remarks
9.3.1 Greasing Drawing: position 5
− Grease the nuts of the ballscrews of the 13
machine slides axis.
...by giving 3 shots of the greasing pump.
− Grease the nuts of ballscrews of the frontwork
units (The nut must be in forward position)
...by giving 3 shots of the greasing pump.
− Grease the UNIBAL rodheads of the independent
feeds MOBILEX 47 (ISO 3458Xm2) MOLYKOTE BR2.
See instruction: OPERATION / MAINTENANCE
9.3.2 Check
− Check the state and the tension of the main motor
belt. See instruction: OPERATION / MAINTENANCE
9.3.3 Cleaning
− Clean filtering cartridge of pneumatic circuit. See instruction: OPERATION / MAINTENANCE
9.4 EVERY 3000 HOURS
What to do ? Remarks
9.4.1 Replacement
− Change the filter cartridge Only if the Spraymist option is installed.
See document “OPTIONS AND TOOLS”
9.5 EVERY 6000 HOURS
What to do ? Remarks
9.5.1 Cleaning
− a) Clean and if necessary change suction filters of
recirculation lubrication circuit.
See instruction: OPERATION / MAINTENANCE
− b) Clean the tanks of the two circuits: cyclic and
recirculation.