TT5501 - DECO 10 Headstock Revision
TT5501 en - 12/04
6.
CHECKING THE HEADSTOCK
Actions
Notes
1. Check concentricity by positioning a comparator
inside the spindle, as well as on the spindle front
side.
⇒
Note :
Max. 0.002 mm on the front side.
Max. 0.003 mm inside the spindle.
If necessary, use the 6 adjusting screws A to
adjust the concentricity of the spindle.
2. Insert the collet lightly greased and also check the
concentricity.
⇒
Note :
Max. 0.005 mm.
∆
Caution !
If the spindle is not within tolerance, dis-
mount the spindle again, check and remount
the assembly.
A
7.
BREAKING IN THE HEADSTOCK
Actions
Notes
1. See the break - in procedure sheet
⇒
Note :
Make a photocopy of the original break - in
sheet.
Summary of Contents for DECO 10 Headstock Revision
Page 4: ...TT5501 DECO 10 Headstock Revision 4 TT5501 en 12 04 ...
Page 14: ...TT5501 DECO 10 Headstock Revision Chap 7 14 TT5501 en 12 04 ...
Page 15: ...TT5501 DECO 10 Headstock Revision Chap 8 15 TT5501 en 12 04 8 ASSEMBLY DRAWINGS 305063f1 ...
Page 16: ...TT5501 DECO 10 Headstock Revision Chap 8 16 TT5501 en 12 04 305063f2 ...