Tornado TTM-9000, Manual

Page: 12 / 16

5
And the default keep-warm temperature is 45˚ C.
1. If the current water temperature is less than 45˚ C, the water will be
heated to 45˚ C.
2. If the current water temperature is more than 45˚ C, the water will cool
down automatically to 45˚ C.
Under the keep-warm condition, press the “Dechlorination/Reboil ”
button once, the appliance will enter into heating mode and keep
heating until the water boils.
NOTE: The “Dechlorination/Reboil ” function, which is a way of heating
the water to a specified temperature, is only suitable for the water that
can be directly drunk. If tap water is used, this heating method is not
recommended, otherwise you will drink water that is not boiled. This
function is only used for properly heating the water which is drinkable
tap water or pure water instead of boiling the water.
NOTE: The “Dechlorination/Reboil ” button cannot be switched off
manually during use.
Temperature setting button
The optional temperatures include 45˚ , 55˚ , 85˚ and 95˚ , and the default
temperature setting is 45˚ C.
NOTE: The temperature selected is the temperature for keeping warm,
and the temperature of the water in the inner cavity can not be changed
immediately after finish setting.
Safety lock button & Dispense button
Press down the “Safety lock” button to cancel the locking condition
and its corresponding indicator will light up in red, and the indicator will
extinguish 5 seconds after without pressing the “Dispense” button.
Press down the “Dispense” button and its corresponding indicator
will light up in green, then the water is dispensed. And the indicator of
“Dispense” button will extinguish when release the “Dispense” button,
after 5 seconds, the indicator of “Safety lock” button will turn off and
the appliance will be locked again. At that time, the “Dispense” button is
invalid. The “Dispense” button will not function if the “Safety lock” button
is not pressed down at any time.