background image

Intended Use:

This product is intended for indoor residential and office use only, 
not for industrial or other commercial applications. Use only with 
electrical wiring that is in good working order and that meets 
applicable codes and ordinances. If you have any questions 
whether your wiring is adequate, consult a qualified electrician.

While using your fan, you should follow the IMPORTANT 
INSTRUCTIONS listed below. As part of those instructions, we 
have used the word "WARNING" to indicate the level of hazard: 
WARNING indicates a hazard which, if not avoided, could result 
in injury or death.

IMPORTANT INSTRUCTIONS

As with all electrical appliances, basic safety precautions should 
always be followed to reduce the risk of electric shock, fire, or 
injury to persons, including the following precautions:

Read all the instructions before using this fan.

Use this fan only as described in this manual. Any other use not

recommended by the manufacturer may cause electrical shock,

fire or injury to persons.

Do not operate the fan with a damaged power cord or after the fan

malfunctions or has been dropped in any manner.

Use of extreme caution is necessary when any fan is used by or

near children, disabled persons or pets and whenever the fan is

left operating unattended.

Do not place the fan on a small, unlevel,  uneven or any surface

which might allow fan to tip or fall.

Always unplug fan when not in use, when moving from place to

place, when assembling or disassembling parts, and before

cleaning.

The use of attachments, not recommended or sold by the

manufacturer, may cause hazards.

Do not use outdoors.

To reduce the risk of fire or electrical shock, do not expose to

water or rain.

To reduce the risk of fire or electrical shock, do not use this fan

with any solid state speed control device.

Do not operate the fan with blade guards or any safety device

removed.

Automatically operated device - To reduce the risk of injury,

disconnect from power supply before servicing.

If the power supply cord is damaged, contact your local service

center or a qualified electrician to install an appropriate

replacement cord to prevent any injury or damage.

To reduce the risk of injury to persons, install fan at least 2.1m

(7 feet) above  the floor.

Avoid the use of extension cords due to risk of fire. If an extension

cord must be used, the cord must be minimum

 14 AWG and rated not less then 1875 watts.

Do not run power cord under carpeting. Do not cover cord with

throw rugs, runners or the like. Arrange cord away from traffic

area where it will not be tripped over.

Do not insert or allow any object to enter any openings on the fan.

Doing so may cause electric shock and/or fire hazard. Avoid

contact with moving parts.

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities or

lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

Children should be supervised to ensure they do not play with the

appliance.

2

2

ReAd & SAve TheSe 

INSTRUCTIONS

WARNING:

 Shock Hazard

Use your fan only in dry environments. This fan is not intended 
for use in a bathroom, laundry area, or similar locations, or near 
sinks, washing machines, swimming pools or other sources of 
water. Never locate fan where it may fall into a bathtub or other 

water receptacle. Do not use in damp environments such as 

flooded basements.

m

 WARNING:

 Hot Surfaces

Do not touch fan motor when in use. This motor is hot when in 

use, to avoid burns, do not let bare skin touch hot surfaces.

m

 

WARNING:

 Fire Hazard

Fans have arcing or sparking parts inside. Do not use near 

combustible materials or flammable gases or sources of heat.  

DO NOT USE in areas where gasoline, paint or flammable 

materials are used or stored. To prevent a possible fire, do not 

block air intakes or exhaust in any manner. Do not insert or allow 
foreign objects to enter any ventilation or exhaust opening as this 

may cause an electric shock, fire, or damage the fan.

m

 

WARNING:

 Electrical Shock Hazard

Do not use with damaged cord or plug. Use with adequate 

electrical system that is up to code.   

CAUTION:

 to Prevent Electric Shock

, this product

has a three prong grounded plug that must be inserted into a 
matching properly grounded outlet to reduce the risk of electrical 

shock. Do not attempt to defeat this safety feature.

m

 

WARNING:

 to Reduce the Risk of Fire or Electric 

Shock,

 do not use this product with any solid‑state speed 

control device.

2

Reviews: