Cloud
Traveler
™
2. Titel
5
Cloud Traveler
CT300
Manual 1.0
2.1
LED Indicator
The Tornado Cloud Traveler™ LED indicator displays information about
the status of the device.
Green
Tornado Cloud Traveler™ accesses the Internet successfully
Orange Flashing when Tornado Cloud Traveler™ cannot access the Internet
Red
Tornado Cloud Traveler™ is booting
2.2
Ports & Reset button
The Tornado Cloud Traveler™ has one WAN Ethernet port, a Reset Button, a USB data
port and a USB charging port for charging only.
WAN
Port for connecting an Ethernet cable to an existing network or
an active DSL modem
Reset
Resest Tthe ornado Cloud Traveler™ to factory default.
Press this button for more than 5 seconds to reset.
USB
USB HDD, Flash Drive, Card Reader,
3G USB card or Smartphone
USB Charging
Supports any 5V USB chargeable handheld device
including iPad, iPhone. Connect your iPad/iPhone or Smartphone
to the USB charger port for a fast recharge. (red circle).
2.3 Power ON/OFF
The Power ON/OFF Button powers off the Tornado Cloud Traveler™ .
2.4 Hardware Connection
This section describes the hardware connection of the Tornado Cloud Traveler™
to the Internet.
You need to prepare the following items before you can establish an Internet connection
through your Tornado Cloud Traveler™ :
1. A notebook/tablet PC with a working wireless networking card (WiFi).
2. Existing network with Internet through a DHCP server or a working ADSL/Cable
modem or 3G USB card/3G Mobile phone.
3. Flash Drive/ USB hard drive.
