12
INSTALLATION
Brushes
1. Raise the Brush Housing using the switch
on the control panel. (Emergency Switch
pulled
out
, and Keyswitch turned
on
.) Once
the Housing is fully up, turn off the
Keyswitch.
2. Place Brushes or Pad Holders under the
cover. Locate the Brush Coupler. Pull up the
Brushes to lock them in place.
Brush Housing Skirt Adjustment
3. When properly adjusted, the Brush Housing
Skirt prevents the rotating brushes from
flinging solution off to the sides, where the
Squeegee may not be able to reach.
Power the Brush Housing down so that the
Brushes or Pads contact the floor. Locate
and unscrew the two Skirt Locking Knobs,
and slide the Skirt evenly down to just clear
the floor. Retighten both knobs.
As Pads or Brushes wear, or whenever the Pads or Brushes are removed or replaced,
recheck for proper Skirt clearance.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
