6
steam button then lightly press the steam button and check whether steam is
sprayed out of the nozzle. (Do not aim the spray nozzle at any animals, persons or
electrical products).
7
If there is steam sprayed out, release the steam button and install suitable
accessories according to your needs then push the small button and press down the
steam button again in order to carry out the operations you require.
8
When finishing the cleaning job or stopping the machine to do some other things,
raise the steam button. Then, the safety switch will take effect.
Installation of Accessories
1.
Install the spray cup with hairbrush
Hold the pipe section of the spray cup with hairbrush in your hand. Align the
arrow on the spray cup with the single-line mark on the short spray nozzle on the
machine body and insert the spray cup in position. Rotate the spray cup in
clockwise direction and align the arrow on the spray cup with the double-line
mark on the short spray nozzle on the machine body, as shown in Figure 1. Fix the
spray cup on the machine body. To remove the spray cup with hairbrush, rotate
the spray cup inversely (counterclockwise), as shown in Figure 2, and align the
arrow on the spray cup with the single-line mark on the machine body. Then, the
spray cup with hairbrush can be pulled out.
(I)
(II)
Install spray cup with round brush or bent spray cup
For direct installation on short spray nozzle, aim the spray cup with round brush
or bent spray cup at the top of the spray nozzle, as shown in Figure 3, and push the
spray cup upwards until it is in position. As the short spray nozzle and the spray
cup are positioned in six directions, the angle and direction can be adjusted during
the installation. Or first install the long spray cup and then the spray cup with
round brush or bent spray cup. The long spray cup is installed in the same method
as the installation of the spray cup with hairbrush. The spray cup with round brush
or bent spray cup and long spray cup can be installed in the same procedures as
the installation on short spray nozzle.
(III)
