Receiving the Stand
32352 Rev 1
4
Tormach® PCNC 1100 Deluxe Stand
2
Receiving the Stand
Your PCNC 1100 Stand is delivered in a two wooden
shipping crates banded together with steel bands. A
pallet jack or fork truck can be used to transport the
crates to the installation site.
WARNING! Steel bands can be dangerous.
Use care and wear leather gloves and eye protection
when cutting the bands on the crate (Figure 1). The
smaller upper crate contains sheet metal components.
Remove these and store off to the side.
The larger bottom crate contains the base and splash
guards. Remove the crate sides, plastic covering and
cloth straps. Set aside the splash guards. Locate the
coolant tank in a side compartment. Most of the smaller
components will be stored in the tank as shown in Figure
2. Set the coolant tank aside.
Next, with 2 people turn the base on its side. Then
unbolt the base from the pallet as shown in Figure 3.
Figure 1. Cutting the shipping bands.
Figure 2. Parts stored in coolant tank.
Figure 3. Base on side to remove pallet.
