Tormach, Inc.
P: 608.849.8381 / F: 209.885.4534
tormach.com
TECHNICAL DOCUMENT
Page 3
©Tormach® 2019. All rights reserved.
Specifications subject to change without notice.
TD10383_Touch_Screen_Kit_0919A
Input Selection
1.
Power on PathPilot controller.
2.
If the screen displays an error message or a
blue screen, toggle the Input Select button on
the back of the monitor until input is set to
VGA; press the volume Down button to save
(see
Figure 4
).
Calibration
1.
In the PathPilot interface, click the
Main
tab (see
Figure 5
).
2.
Type
ADMIN TOUCHSCREEN
in the MDI field and click Enter on keyboard (see
Figure 5
).
3.
Following on-screen instructions, touch each point with one finger to calibrate monitor (see
Figure 6
).
Figure 4
Input Select
Volume Down (Save)
Figure 5
Figure 6
