7
Tray
from sliding back. Tighten the
3/8”-16 Flanged Nylock Nut
on
A7729
frame plate studs
until just snug. See
figure 6.1
. Position the
Group 24-31
Battery Box
so that it is not touching any part of the vehicle. While
positioned, use a marker to transfer the location of the holes in the
Battery
Tray
to the
Group 24-31 Battery Box
.
Figure 6.1
Step 7:
With the hole locations transferred to the Group 24-31 Battery Box,
Remove the Group 24-31 Battery Box and Battery Tray from the vehicle.
Drill the holes in the box using a 1/4” drill bit. Install a
1/4" -20 x 3/4”
Grade 5 Hex Bolt
and
1/4" Fender Washer
down through the
Group 24-31
Battery Box
and through the
Battery Tray
. Secure the other side of the
