Page 4
Step 3:
Note: For Model Year 2008-2010 trucks, use the small hole
in the Top Plate as a template to drill a 7/16” hole through
the leaf spring hanger bracket just above and to the right
of the leaf spring bolt. For 2011 and newer model trucks,
the 7/16” hole is already present from the factory.
Install a
7/16”-14 x 1-3/4” Thin Head Hex Bolt
with one
7/16” SAE Flat Washer
through hole in the leaf spring
hanger bracket and out through the small hole in the
Top
Plate.
Secure the bolt with one
7/16” SAE Flat Washer
,
one
7/16” Lock Washer
and one
7/16”-14 Grade 8 Hex
Nut
. Leave the hardware assembly hand tight at this time.
See figure 3.1
Figure 3.1
Summary of Contents for F2012
Page 7: ...Page 3 Figure 2 2 ...
