Torklift C2213, Installation Instructions Manual

Page: 3 / 17

3
C2213/C2220 PARTS INVENTORY
2- 1-
1/2” X 3/16” X 17-7/8”(45cm) BENT INSERT 6- 1/2” GR5 FLAT WASHER
1-
1/2” BOLT FISHER
2-
1/4” X 1” X 2” PLATE WASHER
2- TIE DOWN FRAME PLATE 2-
1/2” GR5 STAR WASHER
2- SPRING PERCH PLATE 2-
1/2” -13 X 1-1/2” GR5 HEX BOLT
6-
1/2” -13 GR5 HEX NUT
2- 1
/2” -13 X 2” GR5 HEX BOLT
6-
1/2” GR5 LOCK WASHER
2-
1/2” -13 X 1-1/2” SQUARE BOLT
2-
1/4'” 2-5/8” INSERT SNAPPER PIN
PIN
INSTALLATION INSTRUCTIONS:
Locate and inventory all parts to become familiar with all brackets. Read
and understand all instructions. Make sure the vehicle is in park, on a
level surface and wheels are chocked before starting the installation.
STEP 1
Locate the driver’s side rear axle front spring perch. Insert the 1/2” bolt
fisher coiled end through the small hole on the underside of the spring
perch and out the side. Place one 1/2” -13 x 1-1/2” square bolt onto the
bolt fisher and string it through.
See photo 1.1 & 1.2 ( Bolt fishing guide
on Page 11 )
STEP 2
Locate the driver’s side cab and spring mount. Locate the oval hole
between the two mounts and the circular hole just to the front of the cab
mount. Insert the 1/2” bolt fisher’s coiled end first through the oval hole
and out the circular hole. Connect the
1/2” -13 x 2” GR5 hex bolt to the
bolt fisher and string it back through. Once through insert one 1/2” GR5
star washer, and one 1/4” x 1” x 2” plate washer through the open end
of the bolt fisher and place individually through the oval hole and pull
back through.
SEE PHOTO 2.1 & 2.2