6
If the battery box is being installed on a boxed frame trailer, install three
1/4" x 1” SS Self-Drilling Screw
s per side through the bottom of the
battery box and into the trailer frame. Place a
7/16” square profile O-ring
around the head of each screw/bolt to protect the battery mat from abrasion.
See figure 3.2
Figure 3.2
Step 4
Reinstall the
Battery Mat
and Batteries. To prevent any possible contact
between the battery terminals and lock, the battery terminals should be
oriented towards the side of the box with the 2” holes. Tightly secure the
batteries with the battery straps.
1/4" x 1” SS
Self Drill Screw
1/4" SS Flat
Washer