10
11
8.2 ASTRONOMIC ON AND TIME OFF
Set astronomic ON per sections 8.0 and 8.1.
TIME OFF
: Press
MODE
until “SCH01” appears. Press
ENTER
until a blank schedule appears then press
SELCT
to select de-
sired channel. Press
HOUR
and
MIN
to set desired OFF time.
Press
SELCT
to select desired days, holiday and/or seasons
and then press
ENTER
.
8.3 TIME ON AND ASTRONOMIC OFF
Press
MODE
until “SCH01” appears. Press
ENTER
until a
blank schedule appears then press
SELCT
to select the de-
sired channel. Press
HOUR
,
MIN
, and
EVENT
to set desired
ON time. Press
SELCT
to select desired days, holiday and/or
seasons and then press
ENTER
.
ASTRO OFF
: Set astronomic OFF per section 8.0 and 8.1.
9.0 REVIEW, MODIFY AND DELETE
Press
MODE
to advance to any of the following MODES:
1. CLOCK MODE: Press
HOUR
and
MIN
to modify existing
settings. Press
ENTER
.
2. DATE MODE: Press
MONTH
,
DATE
, and
YEAR
to modify
existing settings. Press
ENTER
. DAY is automatically ad-
justed.
3. DST Daylight Saving Time: To review press
ENTER
. Press
MONTH
,
DATE
, and
DAY
to modify existing settings.
Press
ENTER
.
4. SEASON MODE: Press
ENTER
to advance to desired
season. Press
MONTH
and
DATE
to modify, and
DEL
to
delete. Press
ENTER
to confirm.
5. HOLIDAY MODE: Press
ENTER
to advance to desired
Holidy. Press
MONTH
and
DATE
to modify,
DEL
to de-
lete. Press
ENTER
.
6. SIGNAL MODE: Press
ENTER
to advance to desired
channel. Press
SIG/SEC
to modify,
DEL
to delete. Press
ENTER
.
7. SCHEDULE MODE: Press
ENTER
to advance to desired
channel. Press
HOUR
,
MIN
,
EVENT
(
SIG1/SIG2
) to mod-
ify time settings. Press
SELCT
and
DAY
to modify days,
holiday and/or seasons,
DEL
to delete. Press
ENTER
af-
ter each modification.
8. ASTRO MODE: Press
SELCT
to select desired channel.
Press
LAT
to change latitude. Press
ENTER
. Press
DAY
and
SELCT
to add or delete days in the sunset mode.
Press
ENTER
. Press
HOUR
and/or
MIN
to change offset
time for sunset. Press
EVENT
to change offset from + to
--. Press
ENTER
and follow the same procedure above to
modify or review sunrise settings.
9. RUN MODE: Time, day and seconds are displayed. If
today is a programmed holiday, and H (Holiday) will
be displayed steady. If today falls within a programmed
season that season # will be displayed.
10.0 OVERRIDE
OVRDE1
to
OVRDE4
(override keys) are effective only in the
run mode
. If a channel is scheduled for ON/OFF (non-signal
timer), then the channel will change the present load status
until the next scheduled event. CH# will flash when the load
is overridden from scheduled event.
NOTE:
If a channel is a signal timer, then the load will turn
on each time the override key is pressed for the length of
SIG1 duration. CH# will flash while the load is on. While
the signal is in progress, it can be terminated by using the
override key.
EVENT
(in the RUN mode) key is used to update the load sta-
tus. It will execute the last scheduled event for all channels.
The display will only show the last scheduled event for CH1.
To viesw the last scheduled event for other channels, sim-
ply press the
EVENT
key again. If there is no schedule pro-
grammed for a specific channel, the display will show --:--
Summary of Contents for DTS400B
Page 10: ...16 17...
Page 11: ...18 19...
