Checks and repairs on electrical components
43
Checking the solenoid valve electrically
WARNING
Risk of injury from electric shock caused by inexpert work on
the electrical equipment.
Disconnect the mains plug from the socket.
Have work on electrical equipment carried out only by
specialist personnel who are qualified for these tasks.
To check the solenoid valve electrically, proceed as follows:
Move the unit into the repair position for the electric control, see from
page 24.
Verify that the fuse (S2) is functioning.
If the fuse is discolored or mechanically defective, replace it with a new one.
If the fuse is visually intact, connect a multimeter to the fuse.
Connect the mains plug to a grounded mains socket with a voltage of 230 V
and a frequency of 50/60 Hz.
