Checks and repairs on electrical components
29
If the result of the continuity test shows a defective line, replace the power
cord, see page 29.
Mount the cover of the electric control.
Replacing the power cord
WARNING
Risk of injury from electric shock caused by inexpert work on
the electrical equipment.
Disconnect the mains plug from the socket.
Have work on electrical equipment carried out only by
specialist personnel who are qualified for these tasks.
To replace the power cord, proceed as follows:
Move the unit into the repair position for the electric control, see from
page 24.
Disconnect the brown cable (P2) and the blue cable (P1) from the circuit
board.
