Figure 2
Figure 3
Charging Port
Rubber Charging Port Cover
Charging Plug
Connect the charger to the headset.The charging time is approximately 4 hours.
During charging, the indicator shows a steady red light or with flashing.When the
battery is fully charged, the indicator red light will switches off.
When you using the headset, if you hear a cadent tone, and the indicator red
light flashes rhythmically, this indicates that the battery needs recharging.
To charge, please pull up gently on the Rubber Charging Port Cover, and turn
the Rubber Cover about 180 degrees. Expose the Charging Port and Plug the
Charger Plug into the Bluetooth headset’s Charging Port. At this time near the
Control Buttons the indicator light turns red or flashing when the battery is
charging. As Figure 2 and Figure 3 shown.
To turn the headset on
Figure 4
MFB
