4
SETTING THE HUMIDITY
Setting Target Humidity Setpoint
Ambient Humidity Display
Recommended Heating Settings:
Recommended Cooling Settings:
Follow the steps below to change your
target humidity setpoint.
Press the
HUMIDITY button.
Use the or button to select the
target humidity setpoint.
Press
DONE when completed
Note:
The target humidity setpoint is not programmable.
Unlike temperature, humidity does not change quickly
and should not be programmed.
+20º and above
+10º
0º
-10º
-20º
Note:
Humidification mode operable during heat mode only.
Dehumidification mode (A/C equipment or De-Humidifier)
operable during cooling modes only.
Heat and Cool each have their own target setpoints.
HUMIDITY
BUTTON
AMBIENT HUMIDITY
HON (Humidify Energzied)
dON (de-humidify Energzied)
TARGET HUMIDITY
SETPOINT BUTTONS
Ambient humidity will flash opposite of the message HON if HEAT and FAN is energized at the same time.
Ambient humidity will flash opposite of the message dON if COOL and FAN is energized at the same time.
Consult your professional HVAC technician for recommended settings for your climate.
The table on the right shows
recommended indoor humidity levels in
relation to outdoor temperatures during
heating (adding humidity).
Increasing Humidity
Outside
Temperature (0°F)
Recommended
Relative Humidity
35% to 40%
30%
25%
20%
15%
