8
TECHNICIAN SETUP MENU
Note:
If Contractor Call Number is selected
ON, your phone number
will show in the display if there has been a continuous call for heating
or cooling for 24 hours or if the light button is held down for 3 seconds.
To remove the phone number from the display, hold the light button
down for 3 seconds.
If
ON
is selected the
beep will sound.
If
OFF
is selected,
there is no sound.
OFF
configures
display light to come
on only with the light
key, which will save
battery power.
ON
configures the
display light to come
on when any key is
pressed.
ON
ON
Heat - Off - Cool
Adjustment Options
Factory Default Settings
The display light can
be configured to
come on when any
key is pressed or
only when the light
key is pressed.
When any key is
pressed an audible
beep will sound.
There is an ON
or an OFF.
You can configure the
system switch for the
particular application:
Heat - Off - Cool,
Heat - Off,
Cool - Off,
Heat - Off - Cool-Auto
Tech Setup Steps (Continued from the previous page)
Beep
System
Switch
Display
Light
LCD Will Show
Use the or
key until the desired
application is
flashing.
OFF
Contractor
Call Number
Allows you to put your
phone number in the
display.
Select
ON
to use this
feature then press
NEXT STEP
.
Use the or
key to move from one
character to another.
Use the or
key to change the
flashing character to
your desired number.
