Attach the Keder rafters to the gable end
corner brackets with D-Clasp Pins.
D-CLASP PIN
Attach the special perimeter poles
(yellow dot) to the corner bracket and pin
with a D-Clasp pin, as shown. Please note that
these poles have a 65
0
cut to the same angle
as the Keder rafter for clearance. Pole is
placed with the open side facing up.
TOP VIEW
Attach the gable end upright to the
intermediate bracket as shown. Please note,
that the offset portion of this bracket is
installed to the upright with a 3/8" cap
screw. Do not tighten fully at this time.
Next, slide the gable end perimeter poles
onto the intermediate bracket. Do not pin
until both poles are installed.
D-CLASP PIN
Gable End Instructions
