2.
Join the main wing
Topthermal 3M has 3 pieces of wings, joined by
using bolt and positioning bar.
Cut the positioning bar(tube and stick, Within the
accessory package), glue the tube bar inside the
center wing and the stick bar will be glued inside
the outside wing in the next step. please make sure
the tube bar in center wing is horizonal.
Insert the bolt to the outside wings, make sure the
flat_tip of the bolt is in the outside of the outside
wing.
Glue with epoxy, rotate the bolt to make the angle
between bolt and side face of outside wing is rjght
angle. Clear the remain epoxy.
Glue the positioning bar(stick bar) in the outside
wing.
Join the center wing and outside wing on the
platform, rotate the bolt untill the outside wings
attached to the center piece very tight if you need ,
and the tip height is about 80 mm.
