Topp Music Gear T-FBK4 Series, User Manual

Page: 5 / 28

1. Input Level dBu
These four LEDs indicate input level of the T-FBK4 with a range from -10dBu to +15dBu.
NOTE: For maximum performance and proper operation, the average input signal should
consistently light up at the 0 dBu LED and the +10 dBu LED lighting occasionally.
2. Clip LED
This LED indicates that there is signal clipping at the Inputs. If necessary, setting the level of the
chain with a external pink noise signal.
3. Filters LEDs
The T-FBK4 offers 24 notch filters (RED LED) for each channel, which are used to indicate the
number of active notch filter. The LEDs that always blink for each channel is the last Live inserted
notch filter.
4. BYPASS
This button is used to bypass the notch filters in the signal path.
5. CLEAR/SET UP
a.) Pressing this button is to active the LIVE mode. (The light of button would be lit steadily.)
b.) Pressing this button again is to clear the setting created by LIVE mode. (The light of button
would be OFF.)
c.) Holding this button for 3 seconds is used to enter SETUP mode. (The light of button would be
kept flashing.)
6. Mode
a.) Pressing this button is to active the MUSIC mode. (The light of button would be lit steadily.)
b.) Pressing this button again is to enter SPEECH mode. (The light of button would be OFF.)
For more information, please refer to USER SETUP part.
7. Power Switch
It switches your T-FBK4 On/Off.
4
Control Elements
Front Panel:
5
(1) (3) (2) (4) (5) (6) (7)