23- Master STEREO AUX RETURNS Controls
These four controls set the level of effects that received from the stereo AUX RETURN connectors, which
can be varied from -
to +15 dB. They are used to provide the further gain for low level effects.
24- TO AUX SEND1/2
The both rotary knobs assign the AUX RETURN signals to their respective AUX SEND outputs: The "TO AUX
SEND1" assign the signal from AUX RETURN1 to AUX SEND1 bus, and "TO AUX SEND2" assign the signal
from AUX RETURN2 to AUX SEND2 bus. The adjustable range goes from -
to +15 dB.
AUX RETURN3 is equipped with the Main Mix & Ctrl/R button. Release the button to send the stereo
signal from AUX RETURN3 to MAIN MIX buses;
Engage the button, then the stereo signal will be sent to CTRL/R output.
26- MAIN MIX & CTRL/R Button
25- AUX RETURNS SOLO Button
The function of AUX RETURN SOLO is like the channel SOLO button. Engaging it sends the signal from
AUX RETURN (1-4) to the CTRL OUT, PHONES outputs and Meters display. It can also be affected by
SOLO mode button, and the LED next to the button will illuminate.
27- SUB1-2/SUB3-4/MAIN MIX Buttons
These three buttons are configured for AUX RETURN4, they can be regarded as the signal assignment
switches. When engaging the SUB1-2, the stereo signal from AUX RETURN4 will be assigned to
Subgroup1/2; in the same way, SUB3-4 for Subgroup3/4, MAIN MIX for MAIN MIX buses.
28- SUBGROUPS ASSIGN TO MAIN MIX
Through these switches, you can operate the subgroup faders as a master
control for assigning the subgroups to MAIN MIX. Engage the LEFT switch to
send the corresponding subgroup signal to MAIN MIX L, and the RIGHT
switch for MAIN MIX R. When engaging the both switches, the signal will be
sent to L/R of MAIN MIX.
21- Master AUX SENDS Controls
22- SOLO Button
These four controls are used to dete-rmine the master AUX SEND levels, which can be varied from -
to
+15 dB. When the external effect units which
connected to mixer, you
can get a f15 dB gain available from these Aux Send outputs. As to the AUX4, it can also provide
the lovable level adjustment for the internal effect signal.
have no input gain control were
The function of these SOLO buttons are the same as the channel SOLO button, they can also be affected
by the SOLO MODE switch. Press the SOLO button, the corresponding AUX send will be routed to the Ctrl
Room/Phones outputs and Meters display.
29- SUBGROUPS Fader
These faders are used to control the levels of the signal send to the
SUB-GROUPS OUT, the adjustable range goes from -
to +10 dB.
Any channel that is assigned to the subgroups, not muted and not
turned down will be assigned to the SUB OUTS.
30- 2TK LEVEL & TO MIX Button
By rotate the knobs, you can adjust the stereo signals level of 2TK
input and engaging the switch allows you to combine the 2-Track
output with the Main Mix. In other words, feeds the 2-Track In
signals into Main L/R output.
