12
19
Wire Connections
Either the 1/4" TRS phone jack or XLR connector can be wired in balanced and unbalanced modes,
which will be determined by the actual application status, please wire your system as the
following wiring examples:
The series speaker connections are made via the rear panel 1/4" and/or Speakon connectors for
easy interface with industry standard cables. Standard, unshielded speaker wire (available at your
local pro audio or music store), with either 1/4" phone or Speakon connectors and wire gauge of
12-14 AWG is recommended.
If your amplifier uses binding posts you can use speaker cables with banana connectors, but be
sure to pay attention to the +/- polarity when making the connections. Make sure that the +
terminal of the speaker, or banana connector, is connected to the+ terminal of the power
amplifier, and that the - terminal of the speaker, or banana connector, is connected to the -
terminal of the power amplifier. It is important that your PA system is connected in-phase,
otherwise you will not have the proper low-end response and stereo image.
Use the following diagrams below to ensure proper connections when wiring your system:
Summary of Contents for FLX 3
