第
10
页
/
共
16
页
6.5 Headlight on/off (Backlight low light switch)
Long press
button for 1 second
，
the headlight is turned on
（
need support of controller
）
.Headlight
icon shows on the interface, meantime display back light low light. Long press
button for 1
second again, the headlight is turned off, the display back light high light.
6.5
Automatic headlight function (off by default)
In automatic headlamp mode, when the ambient light is dark, the photosensitivity is delayed for 2S,
the headlamp indicator icon is on, and the display backlight is low; Three seconds after the ambient
brightness is restored, the headlamp is turned off, the headlamp indicator icon is off, and the
backlight is highlighted.
Note: the photosensitive sensor is in the window display area.
6.6
Power display
When the battery power is normal, the 5-segment LED of the battery is displayed according to the
time and power, and the outer frame is on. When the battery is exhausted, the 5-segment LED of the
battery is completely off and the battery identification flashes, so it needs to be charged immediately.
The battery capacity is shown in the figure below:
Percentage of battery power
（
C
）
and power level table
No.
Percentage on
the
display(SOC)
Level on the
display
Voltage
（
24V) Voltage
（
36V) Voltage
（
48V)