9
-With high performance lithium battery, there is protection against short circuit.
-This product is manufactured in accordance with the laser level quality control
standard.
-With rotating base or wall mounting.
-With touch control the operation is more convenient and the service life is
longer.
-The device complies with the international standard USB charging interface
type-C. It is easy to use and can be charged from any C-type mobile phone
charger.
Working with the device.
Open the battery cover as shown in the illustration and use the special battery
for this product. Note the positive and negative terminals of the battery. Turn on
the key (switch) to take the appropriate action. In this case, the automatic leve-
ling mode allows the tool to automatically level at approximately ± 3 degrees, it
flashes when the angle is outside the self-leveling range.
Touch the line switch button to switch each laser line. Briefly press the slash
button to turn on the external FM reception mode. Note that darkening of the
laser line in outdoor FM reception mode is normal.
Set the lock switch to the locked position and press and hold the mode button
for 3 seconds to enter the tilt mode. At this time, the laser line is on for 5
seconds and off for 0.2 seconds for slow blinking to indicate use in non-self-
leveling mode (ie slash mode).
The instrument can be placed directly on a relatively flat surface or on a meas-
uring worktop. It can also be attached to accessories such as a connecting
base, wall stand or camera tripod.
Attention:
Please do not look directly into the laser beam and do not point it at others.
The accuracy of the instrument is strictly checked before leaving the factory,
but to avoid unnecessary errors, it is recommended that the basic accuracy
test be performed for the first time and when it is not used for a long time.
After use, please lock the pendulum of the tool in time to protect internal move-
ment and place it in time in the box or soft pack. Do not dispose of the battery
in a fire. Do not use a charger that does not match. Please place the battery
out of the reach of children.
Remove the battery when you do not use the tool for a long time (for example,
several months). Do not place the tool in a high temperature environment,
which accelerates the aging of the parts and affects accuracy.
Summary of Contents for professional TMP-3D
Page 15: ......
