11 12
=
operation
；
Yellow area indicates insufficient voltage but
the system can still keep
working; The red area on
the left indicates extremely
low power requiring
immediate recharging. The
graduation and value above the color scale indicate the
percent of residual power against the full power.
The lowest working voltage of the Sprayer is DC
10.5~10.8V. The alarm will buzz to remind the Operator
of charging when the voltage of batter reaches or falls
below this value.
The charger shall be operated indoors at a dry,
well-ventilated and safe place over 50cm above the
ground.
If the Sprayer has been utilized for a short time, it is
unnecessary to charge. If it has been laid aside for a long
time, it shall be fully discharged before being fully charged
with a regular interval (such as one month or two months)
in a bid to maintain the capacity and service life of the
battery.
3. Filling of chemical. Remove the lid of spray tank
to fill the spray tank with chemical
through the strainer slowly, before
tightening the lid of spray tank. (Fig. 4)
※
Never immerse this Sprayer in
water for filling or cleaning.
4.Spraying
Pull the Sprayer to destination
area. Turn on the power switch
(“-“ indicates ON, “O” indicates
OFF). Point the nozzle to the crops
and hold down the switch bar to
start spraying.
(I)
Control of water switch (Fig. 6)
Fig. 5
Fig. 3
Fig. 4
