6
/
8
Picture E
-
Hold the coupling lever to drive the blades after starting.
-
The appliance must be correctly assembled before use.
-
Before use carefully check the appliance for signs of damage.If you notice
any defect do not operate it and take it to your local hardware store for repair.
-
Replace worn or damaged parts with original spare part,as parts not produced
by the manufacturer could result in possible injury.
-
Before scarifying place the grass catcher in its position.
-
Before use,all objects must be removed from the lawn,
-
Only work in daylight or sufficiently good artificial light.
-
Do not run the engine in an enclosed and/or poorly ventilated area, where gas
of the engine contains carbon monoxide, which are dangerous for your health.
-
Wear suitable working clothes and non-slip shoes.
-
Do not use the appliance when it is raining or when the grass is wet.
-
Particular precautions must be taken while appliance on slopes or downing
streches. Mow across the face of slopes, never down or up.
-
Turn off the engine if you must leave the appliance unattended, displace or
incline it..
-
Never lift the rear of the mower while starting the engine and never place
your hands and feet underneath the deck while the engine is running.
WARNING
: After you stopped the engine the blade or rake is still in motion during a
few seconds.
9
Installing and removing the grass catcher (Picture F--G)
Picture F Picture G
a)
The grass catcher is installed already Picture F
b)
Pull up the deflector and place the grass catcher at its place. Picture G
10 Assembly the scarifier roller and aerating roller (picture H--I)
