2. Installation of the product
The product is already assembled to your customer satisfaction .
3. Operation
1. To operate the lawn tractor lifter, just use the foot pedal, which is supplied with the
product .
2. You should continue the lift gear to the end, use the supplied necessarily support frame,
They shall be attached to the main frame with Security clasp.
3. To lower the lift , take oof the Foot pedal from the anchorage and put it onto the small
projection. (See image)
4. Turn the foot pedal and release the air, the lift shall go slowly lower and down.
4. Raise a mower
1,. Position the lift on a flat, solid surface.
2. Position the mower on the lifter, the base of the mower parallel to the lifter reinforcement
frame .
Note: For riding mowers, the rear wheels must be placed on the lifter.
3. Press the pedal to lift the mower 2-3cm. Tie the mower wheels on to the mower lift ,using
the security strap ,then fasten it tightly ,continue to lift the mower higher further .
Caution: Do not lift the mower too high ,it could tip over otherwise. Lift it only as far as
is needed to carry out the required repairs / maintenance.
