813$&.,1*
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
FRQWDFW
WKHVHOOHUIURPZKRP\RXEX\WKHWRRO
,03257$176$)(7<
,1)250$7,21
1.
Use this product only according to
these instructions.
Improper use
can create hazards.
2.
Wear safety goggles and
heavy duty
work gloves during use.
3.
Keep hands and fingers away from
the Crimping Dies (
) when using this
product.
This tool creates approximately
ILYH
tons of crimping force.
4.
Do not use extension for added leverage
on the Fixed Handle (1
) of this tool.
5.
NEVER attempt to crimp wires that
are plugged into an outlet and are
electrically charged (“live”).
6.
Refer to the wire manufacturer’s instruction
manual for specific wire crimping
instructions prior to using this product.
7.
Keep work area clean and well lit.
8.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
product in unexpected situations.
9.
Keep bystanders out of the area
during product assembly and use.
10.
Do not assemble or operate when
tired or when under the influence
of drugs or medication.
11.
This product is not a toy.
Do not allow
children to play with or near this product.
12.
Use for intended purpose(s) only.
13.
Inspect before use.
Do not use if
parts are missing or damaged.
14.
Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
WKH
6HOOHU
for a replacement.
352'8&7)($785(6
5(/($6(.12%
3803+$1'/(
&5,03,1*',(6
),;('+$1'/(
),*85($
23(5$7,1*,16758&7,216
5HDGWKH(17,5(,03257$17
6$)(7<,1)250$7,21LQFOXGLQJ
DOOWH[WXQGHUVXEKHDGLQJVWKHUHLQ
EHIRUHVHWXSRUXVHRIWKLVSURGXFW
1.
Turn the
5HOHDVH.QRE
(1
)
to its
³2))´
position.
2.
3XOOWKH6WRS3LQDVLGH
Select
RQH
SDLURI&ULPSLQJ'LHVRXWRIWKH
VL]HVSURYLGHGWKHQ
insert the
P
into
the
+
Head (
) of
the tool.
3.
3XWWKH6WRS3LQEDFNWKURXJKPDNH
VXUHLWLVSURSHUO\VHFXUHG
Insert an
electrical terminal (not included)
onto the
bare end of a wire. Then place
the
terminal with its wire between the
WZR
KDOYHV
of Crimping Dies (
) on the tool.
4.
Turn the
5HOHDVH.QRE
(1
) to its
³21´
position.
5.
Grip the tool firmly. Then slowly
squeeze the Pump Handle (
3) as
many times as necessary to fully
crimp the terminal onto the wire.
6.
Once the terminal is crimped, turn the
5HOHDVH.QRE
(1
) to its
³2))´
position to
fully retract the Crimping Dies.
Then remove
the crimped assembly.
7.
Store the Hydraulic Crimping Tool in
its
Carrying Case and keep the Case in
a
clean, dry, safe location out of reach of
children and other unauthorized persons.
67233,1
