•
Put the head part on the container and use the clasp to make it fixed.
•
Insert the aluminum pipe into the soft tube, and another end of soft tube is
inserted into air inlet. (Fig. A1)
2) Installation of Blowing function uses
• As shown in the picture, put
①
into the air outlet
④
and tighten it to
•
the left.Put aluminum tube
③
into
②
II. Vacuum ash
•
Only use the fire prevention filter.
•
When the container is full or it feels difficult to vacuum more dust, the filter
needs to be taken out and cleaned.
•
While vacuum the fireplace ash, the ash temperature must be below 40°C.
Do not vacuum the ashs that fire is not extingished! (Fig. A2)
III. After the usage (Fig. A3)
•
Press the switch to turn off vacuum cleaner.
•
Pull out plug.
•
Roll up the power cable.
•
Disassemble the soft tube from the appliance.
•
Take the head part from the appliance.
•
Empty the dust container and wash it.
•
Use rag to dry the container.
•
Take out the filter, clean and wash it carefully, and dry it in air before installed
on vacuum cleaner. (Fig. A3)
IV. Maintenance (Fig. A3)
•
The container and outer shell of head part need to be cleaned frequently.
②
③
④
①
