3 digits, e.g. 080= 80 km/h.
Also, you need open continuous track to check the speed.
E.g.
Send “
123456J0,080
” to turn off this function.
12.2 Low-battery alert
Send SMS “
123456N0/N1,battery
” to set the Low-battery
alert function.
Command SMS
J0 means turn off the function
J1 means turn on the function
Reply SMS
Reply SMS
Low battery
Now is 23%
When the battery level bellows 30%, the unit will send SMS as
“Low power! +GPS IM” to the A1, A2, A3
number.
Note:
N must be capital, battery is the Low-battery
percentage, It should be<45 and 2 digits, e.g. 30= 30%.
E.g.
Send “
123456N0,30
” to turn off this function.
12.3 GEO-FENCE alert
“
123456Ixyz,aabbccddefffgghhiijkkllmmnneppp qqrrssj
”
send above message to set up the geo-fence for the device
to restrict its movement area. The device will send the
message to the A1, A2, A3 numbers as “Stockade +geo
info” if the tracker enters/exits the preset zone. 5 groups
GEO-FENCE areas can be set for the tracker.
Note:
I must be capital.
x=NO. of the GENFENCE(1-5)
y=1 means ON, y=0 means OFF
z=0 means go into, z=1 means go out
e=N means north latitude, e=S means south latitude
j=E means east longitude, j=W means west longitude
aa,bb,cc,dd,gg,hh,ii,kk,ll,mm,nn,qq,rr,ss must be 2 digits.03
means 3. fff,ppp must be 3 numbers.011 means 11.
E.g.
The first Lat.22º45'55.49''N, Long.114º23'46.86''E
The second Lat.22º45'47.40''N, Long.:114º23'54.99''E
Command SMS
Reply SMS
GEO-Fence
Alarm SMS
Note:
the coordinate should be standard format which you can
get from the software of Google earth.
13. Set the local time
Send SMS “
123456Ltime zone
” to set the local time
Note:
L must be capital, + in the time zone means east, - in
the time zone means west. Time zone must be 2 numbers.
So Beijing time zone should be like this: +08
E.g.
send “08” to set the time to the Beijing time
send “123456L-08” to set the time to Los Angeles time
Note:
Send “
XX:30
” to set the east XX and half
time zone.
Send “
123456L-XX:30
” to set the west XX and half
time zone.
E.g.
send “
05:30
” to set the India time
14. GPRS setting
Send SMS “
123456B
” to get the IMEI number of the unit.
Note:
B must be capital.
E.g.
send SMS “
123456B
”
Note:
Before you execute the following GPRS connection,
please submit the IMEI # to the manufacturer to register the
IMEI #.
In order to use GPRS function, the user needs to set IP, Port
and APN (Access Point Name) by sending SMS commands.
