Notkestraße 97 · 22607 Hamburg
SOLAR LÜFTER
TOPLICHT Art-Nr. 1476-300
Tel.: +49 (0)40 - 88 90 100
www.toplicht.de
Schiffsausrüster
ENGLISH
6. FULL 24 MONTH WARRANTY
If within twenty four (24) months from the date of purchase this
product fails due to a defect in material or workmanship, you may
exchange it by returning it to the original place of purchase with
proof of purchase. Alternatively, customers can contact Smart Solar
using one of the contact methods on the back of this leaflet. The
warranty does not apply to:
●
Damage caused by accident, abuse or poor handling;
●
Units which have been subject to unauthorised repair
or modification;
●
Units not used in accordance with the company’s instructions
before, during or after installation;
●
Any parts subject to wear and tear.
●
Batteries
SMARTVENT
Instruction Manual
4. BATTERY REPLACEMENT
(300 ONLY)
The internal rechargeable battery operates efficiently for up to 500
discharge cycles after which the capacity reduces and operation
becomes less efficient. In these circumstances we recommend that
you change the internal battery as follows:
1. Ensure the unit is switched off.
2. Remove the battery cover which is located in the centre of
the ellipse.
3. Remove the AAA battery and replace with a suitable
alternative*.
4. Replace the battery cover.
*Contact customer services for replacement batteries.
Battery specification 1.2V 600mAh NiMh AAA size.
Ensure the batteries are recycled or disposed of in accordance
with local regulations.
DO NOT dispose of battery in fire.
5. TROUBLE SHOOTING
If your SmartVent is not functioning properly, make sure you have
followed the above instructions. If the unit is still not operating
after that then take the following steps:
●
Ensure that the top surface of the unit, above the solar cell, is
clean. We recommend that you periodically clean the top
surface to ensure optimum performance of your SmartVent.
●
Ensure that all switches are in the correct positions as described
in the operation instructions.
●
Ensure that there is no debris or obstructions in the SmartVent
that prevent the impeller from rotating. If necessary the finger
guard can be removed by unscrewing the 2 screws either side
of the ellipse and pulling the guard towards you. The guard is
held in by 4 flexible location tabs, take care not to damage or
break these tabs when removing or replacing the finger guard.
●
If the boost function does not operate ensure the battery is
working and securely in place in the battery holder (300 only),
replace if necessary.
4.2
4.3
