Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Wiring diagram
Power Supply
12-24VDC
L
N
AC110-230V
Single Color LED Strip
Single Color LED Strip
Single Color LED Strip
Single Color LED Strip
1
2
3
4
S
IG
N
A
L
O
U
T
P
U
T
EnOcean LED Dimmer
SR-EN9101
Learning
Key
Learning operation of receiver (EnOcean Switch ID )
Short press on learning button of receiver , press any button of Enocean Switch, once receiver get the signal
from Enocean switch, connected LED flashes for 1 time ( output of receiver), Then it learns successfully.
Within 5 seconds, receiver didn’t get any signal from Enocean switch, then connnected LED flashes for 2 times
( output of receiver), then it withdraws from learning.
Hold finger down for over 5 seconds on learning button of receiver , then it deletes all learned Enocean switch
ID, at this time, connected LED flashes for 3 times ( output of receiver).
