Appendix C: Serial Interface Specifications
3. Remote Control Protocol
A computer or a terminal can be used to control the unit by sending the packet as following.
1-1. Sample control code packets
Example1 : A packet that send "REC" key to DVR (ID=5)
0x85
(length)
0x00
(Receiver ID high byte)
0x05
(Receiver ID low byte)
0x4B
(OPcode = key )
0x08
(DATA1 = "Rec" keycode )
0x5D
(checksum)
Example2 : A packet that send "PAUSE" key to DVR (ID=4999)
0x85
(length)
0x27
(Receiver ID high byte)
0x07
(Receiver ID low byte)
0x4B
(OPcode = key )
0x0C
(DATA1 = "Pause" keycode )
0x0A
(checksum)
Example3 : A packet that send "PLAY" key to all DVR (broadcast)
0x85
(length)
0x7f
(Receiver ID high byte)
0x7f
(Receiver ID low byte)
0x4B
(OPcode = key )
0x0B
(DATA1 = "Play" keycode )
0x59
(checksum)
47
