background image

 

 

Shenzhen TOPFLYtech Co., Limited. All Rights Reserved                                                                                  14 

upgrade command manually 

 

13.

 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this equipment does 

cause  harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by 

turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:   

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that to which the receiver 

is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: 

(1)

 

this device may not cause harmful interference, and 

(2)

 

this device must accept any interference received, including interference that may cause 

undesired operation 

 

Caution! 

Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment. 

 

IMPORTANT NOTICE: 

FCC Radiation Exposure Statement 

This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled 

environment. This equipment should be installed and operated with minimum distance 20 cm 

between the radiator and your body. 

 

Summary of Contents for TLP1-LF















Reviews: