Shenzhen TOPFLYtech Co., Limited. All Rights Reserved 6
Note: Indicator lights will go out automatically after the tracker turns on for 8 minutes.
4.
Installation Guide
4.1
SIM Card Pre-Installation Note
4.1.1
SIM card data service should be enabled.
4.1.2
If SIM card is locked via PIN, please unlock it first.
4.1.3
Ensure there is sufficient balance/data in the SIM card.
4.2
SIM Card Installation
4.2.1
Follow the SIM icon direction then insert the SIM card
4.2.2
Give a slight push then release.
4.3
Installation
4.3.1
This is a plug-and-play tracker. Before the installation, please ensure your vehicle
have a OBDII connector.
4.3.2
After plugged the tracker into the car OBDII connector, it will automatically power
on and the LED indicators will start to flash. This indicates a successful installation.
4.3.3
Please ensure the tracker is firmly connected to the car OBDII connector.
4.4
Ignition Detection and OBDII Data Reading
The tracker detects ignition status and reads OBDII data automatically.
5.
Tracker Configuration
Refer to frequently used operation commands in this manual
6.
Tracker Operation
6.1
Power on and off
6.1.1
Power on: Insert a SIM card and connect the tracker to external power. It will turn
on automatically.
6.1.2
Power off: Remove the SIM card first, then disconnect the tracker from external
power. It will power off automatically around 5~10 seconds.
6.2
Location Search
6.2.1
SMS Query
Send a location inquiry SMS command (refer to the Operation Command in this
manual) to the tracker. The location information will be sent to you through SMS.
6.2.2
Platform Query
Connect your tracker to the tracking platform then check the real-time position
online. (Additional tracking service charge may happen. Contact with your service
provider to get more details.)
7.
Quick Trouble Shooting
7.1
Unable to Connect to the Tracking Platform
7.1.1
Check the APN and IP settings.
7.1.2
Check the SIM card whether support specific network and the data service
