Topfield TF6000F, User Manual, Page: 19 / 58

2.6 Station Settings
15
Motor Control
Goto : Move the motor to the stored position of the selected
satellite.
Store : Store the current position of the motor for the selected
satellite.
The followings are available only in the Installer mode.
Recalculate : Recalculate the position of the Stab Rotor motor.
Goto Ref : Go to reference.
Limit E, Limit W : Set the limits of East and West position.
Limit Off : Remove the limitation.
Reset : Reset all the stored position of the motor relative to the
‘0’ position
2.6.4 USALS Setting
USALS is very convenient mo-
torized DiSEqC system that sup-
ports DiSEqC 1.3 command and
also can get the satellite position
automatically if you know your
geographical location.
To configure the USALS settings,
select the
Installation
>
USALS
Setting menu.
Motorized DiSEqC 1.3
Set this parameter to enable if you have DiSEqC 1.3 switch.
Satellite Name
Select a satellite that will be used to identify a motor position.