Topfield TF 6000 PVR, User Manual

Page: 57 / 106

6.4 Editing channel data on your computer 51
To transfer receiver data, perform the following steps:
1. Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on both of them.
3. Select the Installation > Transfer Firmware
> Transfer Data to Other IRD menu.
4. Restart the digital receiver.
NOTE
You had better memorize some important data such as video
settings before starting transfer to avoid resetting them.
6.4 Editing channel data on your computer
You can edit the channal data on your computer by using a
channel editor program,
Vega . With Vega you can do the fol-
lowings:
• Adding, deleting or modifying satellite entries
• Adding, deleting or modifying transponder entries
• Deleting or modifying service entries
• Adding, deleting or modifying favorite groups
You can not only transfer your channel data to the digital re-
ceiver but also save it as a file, the extension name of which is
std . Vega is available from the Topfield web site,
http://www.
i-topfield.com
.
To use Vega , you have to prepare either a USB cable or a RS-232
cable to link the digital receiver with your computer.