Setting up your Time
1 Press the
MENU
button, and then go to
Set-
tings
, press OK.
2 Press OK on top of
Time
.
3 Make sure the
Mode
is set to
Auto
. Use left or
Right keys beside OK button.
4 Now head down to
Time offset
and adjust it
to the following depending on which state you
reside.
• NSW, TAS, VIC: Time offset = 10:00
• SA, NT: Time offset = 09:30
• QLD: Time offset = 10:00
• WA: Time offset = 08:00
NOTE
With daylight saving you will need to add 1 hour to the above settings.
Network Setup
You need to set up a network connection to enjoy web-enabled features on this unit. The connec-
tion can be either a wired or wireless connection.
Wired connection
1 Connect your Ethernet cable from your router
to the Toppro unit.
2 Press
MENU
>
Installation
>
Network Setting
>
IP Setting
.
3 Select
Wired/Wireless LAN
then select
Wired
.
4 It is recommended to use a dynamic IP address
by the router therefore select
DHCP
as the con-
nection type. However if a static connection is
set then please refer to your router for an IP ad-
dress, Subnet Mask, Gateway, Primary DNS,
Secondary DNS.
5 Scroll down to activate profile and press
OK
on the remote.
11
