12
Setup
2.4.1
Connecting the antenna
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to
your television antenna so that it can receive
digital television services.
Connect the antenna cable to the
ANT 1
con-
nector on the back panel of the digital re-
ceiver.
Also, you must ensure that there is a connec-
tion to both the
ANT 1
and
ANT 2
connectors
on your digital receiver, so that both tuners
work properly.
Normally you do that by using a loop cable to link from the
RF
LOOP 1 OUT
connector to the
ANT 2
connector.
NOTE
However, if you are in a weak signal area, or are using a signal
amplifier with more than one output, you may achieve better
results by connecting a cable from the antenna or amplifier
directly to the
ANT 2
connector rather than using the loop
cable.
If you have another digital receiver, or you want to still receive
analogue channels on your television, link it from the
RF LOOP
2 OUT
connector.
2.4.2
Connecting to your television
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connector,
then use the next connector in the following order for better
picture quality.
1. SCART connector (
TV
)
