4.2 Video and audio settings
19
You cannot fully enjoy wide-screen programmes with your
normal-screen television as the above figures show. The left
figure shows a normal picture displayed in the normal screen.
To watch wide-screen programmes in the shape like the cen-
tre figure, set the
Display Format
option to
Letter Box
. Wide-
screen pictures then will be reduced to fit to the width of the
normal screen. Otherwise, to watch them in the shape like the
right figure, set it to
Center extract
. Then wide-screen pictures
will be cut out on the left and right sides equally to fit to the
width of the normal screen.
4.2.3
Audio mode
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the
Sound Mode
option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §
5.2.4
for a detailed description.
4.2.4
Radio frequency output
If you have connected your television to the
RF OUT
socket of
the digital receiver, you should configure the radio frequency
output. The digital receiver can make analogue television from
digital television and output it via the
RF OUT
socket.
Table 4.1: Television standards by country
