BYTTON UMTS
User’s Manual (Preliminary)
TOPEX S.A. +40-21-232 04
http://www.topex.ro
p. 37
Note
: When SIM Status displays “locked by PUK2” or “locked by PIN2” this in not an
error warning, it means it is locked only for special network services (such as roaming)
that BYYTON UMTS does not require.
-
Manufacturer
: the name of the producer of the equipment
-
Software Version
: the version of the firmware, also read from the 3G module
-
IMSI
(International Mobile Subscriber Identity), identity of the subscriber (of the SIM
card). This is a unique code number (15 digits) that identifies a mobile subscriber to the
network. If the UMTS module of BYTTON detects an active SIM card, it will query (and
display) the IMSI code. Since the IMSI code is related to the SIM, when you change the
SIM card used with BYTTON you will have another IMSI code.
-
IMEI
(International Mobile Equipment Identifier). 15-digit number that uniquely identifies an
individual mobile terminal wireless device. While IMSI is specific to the subscriber (SIM card),
IMEI in specific to the equipment (UMTS modem of BYTTON)
-
Signal Level
, displayed with white figures on black background. The two digits indicate the
level of the RF signal for the GSM/GPRS/UMTS network: 0 means less than -113dBm, 31
means “over -51 dam”, and so on. 99 means unknown or non-measurable level of RF signal.
-
Registration status
: shows if the SIM card of the equipment is registered to the mobile
network or not.
-
Volume Level
, shows the sound level in a range from 0 to 4 (the "0" level means quiet).
5.7 SMS
Using the "SMS" option, you can to send or to receive SMS messages through the UMTS
module of the equipment. It has the following divisions: Settings, Read (receive) and Send
(Transmit)
5.7.1. SMS Settings
In order for the SMS facility to operate, you must have the correct settings.
“SMS Center”
is the center for SMS messages of the of the GSM operator - the phone
number of the center for SMS of the respective GSM carrier. You may edit (change) this