USER MANUAL
MACHINE FOR CERAMIC TILES
16B270; 16B271; 16B272; 16B273
16B280; 16B281; 16B182
NOTE: BEFORE USING THE APPLIANCE, READ THIS MANUAL CAREFULLY AND KEEP IT FOR FURTHER REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIAL PROVISIONS FOR THE SAFE WORK OF A MACHINE FOR CERAMIC TILES
THE MACHINE IS NOT DESIGNED FOR CUTTING WOOD, METAL, GLASS OR PLASTIC.
•
The device is designed for cutting tiles (glaze and terracotta)
•
Keep your workplace clean
•
Place the device on an even, solid and stable surface
•
Regularly check the condition of the cutting knife, in case of damage or wear, immediately replace the knife with a new one
•
Ensure that the tile to be cut is placed in a stable position so as to prevent it from shifting during cutting
•
Cuts can only be made when the fingers and hands are outside the cutting zone and the space of the cushioned part of the table
top
•
Use only original knives supplied by the manufacturer in the device
Careless cutting of the tiles may cause cuts, always use gloves and safety glasses!
INSTRUCTIONS FOR USE:
•
Place the tile in the desired position and under the desired account using the device's adjustable guides
•
Make sure that the plate lies firmly on the razor table and will not move during cutting
•
The cut should be made with a uniform movement, pressing the lever of the trolley with the knife
•
Break the tile using a trolley equipped with a tile breaker by pressing the lever
WARNING! PLATES MUST BE BREAKED AT THE BEGINNING OF THE GUIDE. BREAKING OF TILES ELSEWHERE RISK OF DAMAGE TO THE
TOOL OR THE TILE.
TECHNICAL DATA
Equipment
16B270
16B271
16B272
16B273
Maximum cutting length
500 mm
600 mm
800 mm
1000 mm
Equipment
16B280
16B281
16B282
Maximum cutting length
450 mm
550 mm
650 mm
Razors 16B280; 16B281; The 16B282 is equipped with a mechanism for drilling round holes in tiles.
EXPLANATION OF THE PICTOGRAMS USED
1.
Read the Operating Instructions, observe the warnings and safety conditions contained in them.
2.
Use protective gloves!
3.
Use protective glasses!
CARE AND MAINTENANCE
•
Clean the device after each use. Particular attention should be paid to the cleanliness of the guides and the knife. For cleaning,
use a damp cloth and mild detergents.
•
Use original spare parts.