14
11. How to Use the Camera to Control the Power Supply of the Industrial
Equipment Directly
11.1 Click the camera to enter the monitor display and control interface when the status
displays
“Connected” (Refer to step 9.1).
11.2 You can press the timer setting icon on the main control interface to set the
working mode of the switch to self-hold mode (The switch will hold the status once you
press down the control button). The output of the relay switch will be always on or off
according to the status of the push button.
11.3 You can also set the timer (7*24Hours) to power on/off the device automatically
according to the setting.
Timer setting icon
Tick
to
select
self-hold mode
Click here to set the
ON/OFF status of the
relay output.
Summary of Contents for TC186
Page 12: ...12...
