9
Connecting of Power Supply
WARNING: NEVER connect the gate opener to the power outlet
before all the installations have been done.
The power supply cord should be at least 3×0.75mm
2
(3C×18AWG). Connect
the live wire and neutral wire to the “L” (2) and “N” (1) terminal respectively;
and connect the earth wire to “PE”.
NOTE: The power supply cord is not included in the package.
Connecting of the Control Board
1. Motor
The
BLACK
wire of the motor should be connected into the “3” terminal.
The
YELLOW
wire of the motor should be connected into the “4” terminal.
The
RED
wire of the motor should be connected into the “5” terminal.
Summary of Contents for RK700
Page 6: ...3 In sake of safety a positive stop must be mounted on the two end of ground track...
Page 19: ...16...
Page 20: ...17...
